With imperial standard shaft & bushings made to our rigid engineering specifications. They have genuine 6.35mm (1/4) shafts with a flat machined 25% of the diameter for grubscrews or interference fit knob mounting. The shaft is 38mm long. The bush is a 3/8 32 T.H.D. type which we believe is necessary for good fixing to a panel. Another important feature of the pots is their PCB mount capability. The pins are rigidly mounted on phenolic with the centre pin offset from the two outer terminals. When soldered into a PCB, the pot is quite rigidly held on its own. Double gangpots are held in 6 places and require no extra mechanical mounting assistance. The pins are large enough to terminate screened cable, etc., if the job requires hard wiring. An engineering drawing appears below. You may safely use it to design PCB artwork etc., as we have standardised this design.
Features:
- Value10K
- Power rating is 0.5W max
Specifications:
| Potentiometer Terminal Type |
Solder Legs |
| Potentiometer Diameter |
24mm |
| Potentiometer Gang Number |
Dual gang |
| Log or Linear? |
Linear |
| Potentiometer Knob Type |
Imperial D |
| Potentiometer Shaft Length |
38.5mm |
| potentiometer nut size |
24mm(3/8inch 32THD) |
| Pack Quantity |
1pc |
| Passive mount type |
Panel,Through Hole |
| Passive connector type |
Solder Legs |
| Component package |
Metal can |
| Passive number of legs |
3 count |
| Passive marking code |
Number code |
| Cost: |
$25 |
| Free Shipping |
We offer free shipping on orders over $30. Please check the free - shipping eligibility at checkout. |
| Delivery Time: |
It usually takes [3-5] business days for standard shipping. Please note that this is an estimated time frame and may be affected by local holidays, and unforeseen circumstances. |
Sale! 
Reviews
There are no reviews yet.